Epson Customer FAQ

Если мигают все индикаторы на принтере Epson L3250, это может указывать на ошибку или проблему с принтером. Рекомендуем проверить бумагу на наличие застрявшей бумаги, убедиться, что картриджи правильно установлены и не пусты, а также проверить состояние питания. Если проблема сохраняется, желательно обратиться к руководству пользователя или найти решение в списке ошибок на официальном сайте Epson.

If your Epson ET-3750 hasn't been used for 1.5 years, it's possible that the ink has dried in the printhead, which could prevent printing. You may need to perform a printhead cleaning or flushing to restore functionality. The printer's maintenance menu typically has a printhead cleaning option you can run. If that doesn't work, a manual flushing process may be necessary, though this can be more complicated and might require special tools or ink. It's best to consult the printer's manual for specific flushing instructions or maintenance options.

The URI (Uniform Resource Identifier) for your printer refers to the location of the printer on a network. To find the URI for your Epson printer, you should: 1. Install the Epson printer driver on your computer first. 2. Then, go to the 'Printers' section in your computer's Control Panel or System Preferences. 3. Right-click or control-click on your Epson printer. 4. Choose 'Properties' or 'Printer Properties'. 5. You will find the URI in the 'Location' or 'URI' section, often under the 'General' or 'Settings' tab. Please note that the exact steps may vary depending on the model of your printer and the operating system of your computer.

No, you cannot use a 4850 software disk to set up a 3850 printer. It's important to use the correct software for each specific printer model. The software disk for a 4850 printer may not be compatible with a 3850 printer model. It can even result in limited functionality or issues with your printer. We recommend downloading and using the correct drivers and software from the Epson official website or use the disk provided with your Epson 3850 model for a successful setup.

To set up the scanner on your Epson ET-4760, follow these steps: 1. Open the scanner unit. 2. Place your original document on the scanner glass. 3. Push down the scanner unit until it clicks into place. 4. Open the Epson ScanSmart application on your computer or Epson iPrint app on your mobile device. 5. Choose either Document or Picture scanning mode based on your needs. 6. Ensure your ET-4760 printer is selected. 7. Configure the settings as preferred (like resolution, image type, etc.) 8. Click 'Scan' to start the process. After the scanning process ends, you can save, print, or share your scanned item accordingly.