Sanyo Customer FAQ

To access the WiFi setup on your Sanyo TV, go to the home screen and navigate to the "Settings" menu. From there, look for "Network" or "WiFi" options. Select your WiFi network and enter the password if prompted. Make sure your TV is within range of the WiFi signal for a successful connection. If you need specific steps, consult your user manual for detailed instructions.

If your Sanyo UN50UN6900F won't turn on and the red light is blinking, it could indicate a problem with the power supply or a system error. First, try unplugging the TV from the wall outlet for about 60 seconds, then plug it back in and attempt to turn it on again. If the issue persists, check for any loose connections or external devices that may be causing interference. If these steps do not resolve the issue, it may require professional service.

The most up-to-date contact information, including the phone number for Sanyo TV tech support, can be found at the link right here on this page that you are viewing.

To identify your Sanyo television model, check the back or side of the TV for the model number on the identification label. This label typically includes the model number, serial number, and other relevant information. You can also refer to the original packaging or user manual if available. The model number usually starts with letters followed by numbers, which will help you determine the specific type of Sanyo television you own.

To set up your Sanyo FWZV475F to play and record to your Samsung UHD UN50TU7000, you will need an HDMI cable. Start with both units turned off. Plug the HDMI cable into the 'HDMI OUT' port on the Sanyo unit, and the other end into any 'HDMI IN' port on the Samsung TV. Turn on both units and set the TV to the corresponding HDMI input. To record, make sure the Sanyo unit is set to the right channel and press the record button. Remember, due to copyright protections, some programming may not allow recording. Always check the user manual for both units for specific instructions.